Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 2: REMOVE OLD FILL VALVE
A: REMOVE CONNECTOR
Remove water supply
connector from bottom
of fill valve by twisting
connector nut to the left
(clockwise).
NOTE: Inspect water
supply connector.
Replace it if it is worn, or
you don't know how old it is, to
Towel
prevent flooding and property damage.
(Optional)
B: REMOVE OLD LOCKNUT
Below tank, twist locknut
to the left (clockwise) to
remove from fill valve.
C: REMOVE OLD FILL VALVE
Including refill tube, refill
clip and shank washer.
Drain any excess water
into bucket by removing
fill valve from tank.
(Pull fill valve up)
Bucket
(Optional)
4
LEFT
LEFT
STEP 3: REMOVE OLD FLAPPER
A: DISCONNECT
FLAPPER CHAIN
B: REMOVE FLAPPER FROM
FLUSH VALVE SEAT
Simply unhook or lift flapper
arms off the flush valve
mounting posts, depending
on the type of flapper.
Flexible Frame Flappers
Unhook
Solid Frame Flappers
5
Publicidad
