Siemens SIMATIC ET 200SP Manual Del Usuario página 11

Changes to chapter: 5.3 Identification data
The activation code for Windows is already integrated in the supplied image.
Depending on the scope of delivery, the "Certificate of License" is provided as proof of license.
This document is valid for the following product:
• S7-1500 Software Controller CPU 1505SP
• S7-1500 Software Controller CPU 1505SP F/T/TF
• WinCC Runtime Advanced V16
Removing the CFast card during operation
Do not remove the CFast card while the Open Controller CPU 1515SP PC2 is running.
Missing drivers in the device manager after initial setup
Not all drivers of the Intel® processor are pre-installed in the "Windows System Image Manager" of the
Open Controller CPU1515 SP PC2. The drivers are not required for the operation of the Open Controller CPU1515 SP PC2 as a
programmable controller. The question mark in the Windows 10 device manager can be accepted.
Acronis backup is not supported
The Acronis backup is not supported in the current version – use Image Partition Creator.
No activation of the Windows copy
If you do not have an Internet connection, you do not need to activate the Windows copy. There are no functional
restrictions.
Display of processor temperature by SIMATIC IPC DiagBase
The SIMATIC IPC DiagBase software shows only the temperature of the CPU. The temperature of the motherboard and work
memory are currently not displayed.
Changing the boot order
The boot sequence changes automatically when a DVD drive with USB connection is connected to the
Open Controller CPU 1515SP PC2 ≥ V2.5.
Restrictions when using the power management function
The power management function helps to maximize the performance of your PC or to save energy. Activating the "Power
saver" function might restrict the functions of the software controller.
Key combination <Ctrl+Alt+Del> during initial commissioning
To ensure that the initial initialization is complete, do not use the key combination <Ctrl+Alt+Del> during the initialization
phase.
Operation with two monitors
Use only one monitor. If several monitors are used simultaneously, undefined states might occur in the system.
The following display and HDMI splitters are recommended for the CPU 1505S F:
• Display splitter: Multi Stream Transport (MST) Hub DisplayPort™ 1.2 Quad Monitor CSV-5400
• HDMI splitter: Delock Display Port 1.2 Splitter 87720
Cables for connecting the DisplayPorts
Use only the following cables to connect the DisplayPorts:
• DisplayPort cable, length: 5 m, E74020-C AWM Style 20276, 80°C, 30 V, VW-1 (with integrated ferrite cores at both ends)
• DisplayPort cable, length: 3 m, 6AV7860-0DH30-0AA0
• DisplayPort cable, length: 5 m, 6AV7860-0DH50-0AA0
Maximum current consumption
The max. current consumption is: 2.9 A
Product information on CPU1515SP PC2 (F/T/TF) and CPU1515SP PC2 (F) Ready4Linux
A5E44910079-AD, 08/2020
11