Product Information; Documentation Overview - Siemens SIMATIC ET 200SP Manual Del Usuario

SIMATIC
ET 200SP Open Controller
Product information on CPU1515SP PC2 (F/T/TF) and
CPU1515SP PC2 (F) Ready4Linux

Product Information

Documentation overview

The following topics are described in this product information:
• CPU 1515SP PC2 (F/T/TF) - Windows version (Page 10)
This part of the product information supplements the documentation for the
ET 200SP Open Controller CPU 1515SP PC2 (F/T/TF), edition 09/2018.
The described functional restrictions apply exclusively to the Open Controller CPU 1515SP PC2 (F/T/TF) V20.8.
• CPU 1515SP PC2 (F) - Ready4Linux version (Page 16)
This part of the product information contains important information about operating the ET 200SP Open Controller
with the S7-1500 Software Controller.
Affected versions:
ET 200SP Open Controller CPU 1515SP PC2 (F) Ready4Linux Version 20.8 and higher
–
S7-1500 Software Controller CPU 1505SP (F) Ready4Linux Version 20.8 and higher
–
CPU 1515SP PC2 (F/T/TF) - Windows version
Validity
This product information supplements the documentation for the ET 200SP Open Controller CPU 1515SP PC2 (F/T/TF),
edition 09/2018.
The information provided in it should be considered more up-to-date if uncertainties arise.
The described functional restrictions apply exclusively to the Open Controller CPU 1515SP PC2 (F/T/TF) V20.8.
Technical update
Changes to chapter: 4.2 Characteristics
Optionally with HMI: WinCC Runtime Advanced as of V16
Changes to chapter: 4.6 Scope of delivery
Larger CFast card with 128 GB memory.
Optional only for CPU 1515SP PC2/CPU 1515SP PC2 F/T/TF: WinCC RT Advanced V16 or higher
The following component is no longer included in the scope of delivery:
• Restore USB stick to restore the image
This chapter contains information on how to create a Restore USB stick in future: Creating and using the Restore USB stick
(Page 14).
10
© Siemens AG 2018 - 2020. All rights reserved
A5E44910079-AD, 08/2020