Keypad Description - Hach SL1000 Manual Básico Del Usuario

Figure 5 Measurement screen (lower part)
1 Probe icon, port number, parameter or probe name
2 Calibration status icon (calibration correct)
3 Secondary measurement value (user-selected
parameter)
4 Tertiary measurement value (user-selected
parameter)
5 Right and left arrows to select the applicable site ID
6 Options (contextual: Read, select, OK, delete)
7 Checkmark: Completed measurement on site

Keypad description

Refer to Figure 6 for the keypad description and navigation information.
Figure 6 Keypad description
1 POWER key
2 MAIN MENU key: Select verification, calibration,
routes, settings, data log, information, diagnostics,
operator ID and site ID
3 LEFT selection key (contextual): Details,
select/deselect, cancels or exits the current menu
screen to the previous one
1
UP, DOWN: Scroll through measurements when there are more than four measurements,
RIGHT, LEFT: Scroll through operator and sample IDs.
8 Active arrow keys
9 Site ID icon and site name
10 Routes icon (shows when routes is set to on)
11 Options (contextual: Details, exit, cancel, select,
deselect)
12 Primary measurement value (user selected)
13 Stability icon
4 RIGHT selection key (contextual): Read samples,
delete, select or confirm options, opens sub-menus
5 Navigation keys UP, DOWN, RIGHT, LEFT
through menus, enter numbers and letters.
6 HOME: Go to the main measurement screen.
1
: Scroll
English 9