Intended Use; Safety Information - BGS technic 9603 Manual De Instrucciones

Vibration Dampener Mounting Tool Set
TOOLS
1 Vibration dampener holding tool,
to be used as OEM T10531/1
2 Crankshaft wheel tension bolts,
to be used as OEM T10531/2
3 Nut for crankshaft wheel holding tool,
to be used as OEM T10531/3
4 Adapter piece for crankshaft wheel holding tool,
to be used as OEM T10531/4

INTENDED USE

The tool kit is used to press the sprocket to the crankshaft stub when disassembling / mounting the
vibration dampener on VAG 1.8 & 2.0 TFSI engines.
More information regarding this item and a list of suitable engines and models can be found on our
website: www.bgstechnic.com

SAFETY INFORMATION

•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working with the engine running. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
•
Keep children and other unauthorized persons away from the work area.
•
Be careful when working on hot engines because of the risk of burn injuries!
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to the
vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the timing
again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
ATTENTION
Never use adjusting tools as counter-holders when loosening or tightening e.g. camshaft, crankshaft
or balance shaft wheels. Use only a counter-holding tool for this purpose, otherwise tools or engine
components may be damaged.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
1
for VAG 1.8, 2.0 TFSI engines
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Art. 9603
3
2
4
1
1
1
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed