Publicidad
Idiomas disponibles
Idiomas disponibles
9. Tighten all M812 CL10.9 fasteners with torque wrench to 75 Lb.-Ft.
(102 N*M)
Proper torque is needed to keep the hitch secure to the vehicle when towing.
11. Reinstall fascia: Reinstall fascia: starting from the center of the vehicle lineup and
gently reinstall the rear fascia and all fasteners in reverse order. (Note: reattach any wiring
hardness if removed)
©2016 Cequent™ Performance Products, Inc. -
Printed in Mexico
10. Reattach exhaust: Raise exhaust back into position and reattach to the rubber
isolator.
12. Trim appearance panel: Appearance panel will need to be trimmed
or not reinstalled. Obtain owner permission before trimming. Trim
appearance panel as shown. Reinstall if trimmed.
Sheet 6 of 18
76112NP
11-10-16
Rev. B
Publicidad
