Abicor Binzel WH-Interlock Instructivo De Servicio página 17

Alignment jig
1
1 Adjusting lever and holder
2 Torch neck
Abb. 1 Installing the alignment jig
1 Fasten the alignment jig.
2 Mount (5) the clamping device and the guide device according to the bending angle to be checked (3)
on the base plate (4).
The device has been designed so that all bending angles of a torch series can be tested in one clamping
using additionally screwed on guide devices. For special torches, the alignment jig is customized.
BAL.0022 • 2017-02-15
5
3 Clamping body
4 Base plate
2
5
5 Functional Description
3
4
Guide device,cmpl
with test device
EN - 7