Cequent Performance Products 24947 Instrucciones De Instalación página 4

1a. Remove fascia - using a T15 torx bit, remove (5) screws from
inside of wheel well, both sides.
1c. Remove fascia - using a T15 torx bit, remove (8) screws from
underbody panel near the wheel wells, (5) on driver's side, (3) on
passenger's side.
©2016 Cequent™ Performance Products, Inc. -
Printed in Mexico
1b. Remove fascia - using a 7mm socket, remove (1) screw located
vertically in the upper area of wheel well, behind wheel well liner,
both sides.
1d. Remove fascia - using a 7mm socket, remove (5) screws from the
under body panel to fascia.
Sheet 4 of 21 24947NP 9-19-16 Rev. B