EAS ELECTRIC EMWI82401 Manual De Instrucciones página 56

Ocultar thumbs Ver también para EMWI82401:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MAINTENANCE
Cleaning Drain Pump Filter
Warning!
Be careful of the hot water!
Allow detergent solution to cool down.
• Unplug the machine to avoid electrical shock before washing.
• Drain pump filter can filter the yarns and small foreign matters from the
washing.
• Clean the filter periodically to ensure the normal operation of washing
machine.
Dam-Board
After the power is dis-
connected, pull out the
Dam-Board.
Caution!
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap
plates should be inserted aligning to hole plates otherwise water may leak;
• Some machines don't have emergency drain hose, so step 2 and step 3 can be skipped.
Rotate lower cover cap directly to make water run into basin.
• When the appliance is in use and depending on the programme selected there can
be hot water in the pump. Never remove the pump cover during a wash cycle, always
wait until the appliance has finished the cycle, and is empty. When replacing the
cover, ensure it is securely re-tightened.
1
Turn the filter down as
shown with the figure and
take out sundries matters.
2
23
Reinstall each part back
after sundries matters are
removed.
V.1
3

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido