Using Your Induction Hob - Infiniton IND-230 Manual De Instrucciones

Using your Induction Hob

To start cooking
1. Touch the ON/OFF control.
After power on, the buzzer beeps once, all displays
show " – " or " – – ", indicating that the induction
hob has entered the state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. Touching the heating zone selection control, and
a indicator next to the key will flash
4. Select a heat setting by touching the "-" "+" control.
• If you don't choose a heat setting within 1 minute, the induction hob will
automatically switch off. You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
• By holding down either of these buttons, the value will adjust up or down.
12