Edelbrock PERFORMER Serie Instrucciones De Instalación página 10

MAINTENANCE & CARE INSTRUCTIONS
FOR ENDURASHINE PARTS
™
Congratulations, you have purchased a superior product from America's premier Automotive Aftermarket Manufacturer -
Edelbrock. With the proper care and cleaning, your EnduraShine parts will continue to look good and keep their high gloss
shine for years.
CLEANING OR REBUILDING YOUR CARBURETOR: NEVER clean your EnduraShine parts with solvents or carburetor
cleaners of any kind. Use of these cleaners will dull the luster and will remove the coating. Never use solvents or carburetor
cleaners when rebuilding your EnduraShine carburetor. Do not use paper towels to wipe or clean your EnduraShine parts.
Although we test our coated products with various fuel types, gasoline formulations may stain the EnduraShine coating. In all
cases, take extra care to prevent gasoline from covering the manifold or exterior of the carburetor.
ALWAYS clean your EnduraShine parts using mild soap, water or non solvent cleaners such as Simple Green. Use of products
such as Novus No. 1 Plastic Clean & Shine or other products listed below will help keep the shine and act as a dust repellent.
When cleaning always use a clean, soft cotton, non-abrasive, absorbent, lint-free, micro-fiber cloth and a short circular stroke
cleaning motion.
SCRATCH REMOVAL: DO NOT use a chrome polish or a scratch remover that is not clear coat safe.
For best results, a high quality polish such as Novus No.2 Fine Scratch Remover, Meguiars or Mothers Plastic Polish should
be used. Before the application of any scratch removal product ensure the surface of the part is clean and free of any dirt or
grime and follow the directions of the cleaning product carefully.
ONLY USE the products listed below to DO NOT USE the products listed below to
clean your EnduraShine Parts clean your EnduraShine Parts
Cloth Towels Paper Towels
Microweave Cloth Scouring Pads (Scotch Brite)
Soap & Water Steel Wool
Simple Green Carburetor Cleaner
®
Turtle Wax Wash & Wax Any Petroleum-Based Solvents
®
Automotive Paint & Finish Cleaner Chrome Polish or Cleaner
Novus Plastic Polish & Detail Supply Polish
®
Meguiars Plastic Polish & Cleaner
®
Meguiars Cleaner Wax
®
Mothers Plastic Polish
®
Mothers California Gold Wax Products
®
NOTE: Any cleaning products used on your EnduraShine parts MUST be clear coat safe or developed for the cleaning of acrylic
coatings. We suggest applying any automotive wax coat after cleaning, this will help to seal the surface and protect the finish.
Use of abrasive or solvent cleaners will void your manufacturer's warranty.
Performer and Thunder Series AVS Carburetors
©2013 Edelbrock LLC
Rev. 10/08/13 - QT/mc
Page 10 Brochure #63-0061