Publicidad
Step 12
Insert a SLIDE CAM (10A) into the SMALL DRAWER
å
SIDES (D496 and D497).
Fasten a DRAWER RIGHT (35GC) to the SMALL RIGHT
å
DRAWER SIDE (D496) and a DRAWER LEFT (35GD) to
the SMALL LEFT DRAWER SIDE (D497). Use four GOLD
5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
NOTE: Use the exact holes shown in the SMALL DRAWER SIDES.
å
NOTE: The screw head in the CAM must be visible
å
through the slotted hole in the SLIDE.
Repeat this step for the other small drawer.
å
2
3
www.sauder.com/services
Roller end
10A
1
D497
(4 screws per drawer)
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
D496
2
3
3S
419612
10A
Roller end
1
Page 17
Publicidad
