Using The Lock; Timer - Dacor DTI36P876BB Manual Del Usuario

Operation

Using the Lock

You can use the Lock to safeguard against a child unintentionally turning on a
cooking zone and activating the cooking surface. Also, the control panel, with the
exception of the POWER key, can be locked to prevent the settings from being
changed unintentionally, for example, by wiping over the panel with a cloth.
Switching the Lock On/Off
36"
30"
NOTE
• If you activate the Lock while the cooktop is operating, touch the POWER button to turn the
cooktop off for safety reasons.
• If the Lock is enabled when the cooktop is not operating, all buttons will be disabled
including the POWER button.
22 English
DTI30P876BB,DTI36P876BB_DG68-01296A-00_EN+MES+CFR.indb 22
1. Touch the Lock key for approximately
3 seconds.
An acoustic signal will sound as
confirmation.
2. Touch any control key.
will appear in the displays,
indicating the Lock has been activated.
3. To switch the Lock off, touch the Lock
key again for 3 seconds. An acoustic
signal will sound as confirmation.

Timer

1.
2.
The timer can be adjusted from 0 to 99.
3.
NOTE
To change the settings quicker, touch and hold any of the
•
until the desired value is reached.
When the timer is terminated, it sounds a beep 4 times. However, the cooking
•
zone will not be turned off.
Press the Timer key. The number 10
will be displayed above the timer
display.
Use the Timer setting selectors ( or
) to set the desired amount of time.
Then, press Timer key again.
NOTE
To cancel the timer settings, hold down
the Timer key for 3 seconds.
or control keys
2020-06-02 11:21:00