Using The Cooktop Burners; Ignition - Dacor DTG30M954F Serie Manual De Usuario

Using the cooktop burners

Ignition

CAUTION
The knob LED indicates if a burner knob has been turned on.
It does not indicate if the burner flame is on.
Check for an actual flame, although the knob LED is on or off.
NOTE
When the inner/outer flame is on HI, the outer flame gets smaller as you turn the knob
from HI to LO. To control the inner flame, push and turn the knob again at the point that it
starts to control the inner flame.
22 English
NA9300K_MOD_DTG30M954FS_DG68-00927A-02_EN+MES+CFR.indb 22
Make sure all cooktop burners are properly
installed. To light a burner:
1. Push in the control knob, and then turn
it to the Lite position. The knob LED
turns on and you will hear a "clicking"
sound indicating the electronic ignition
system is working properly.
2. After the burner ignites, turn the knob
to the desired cooking level.
2019-04-23 2:59:59