Precor Discovery Selectorized Serie Manual Del Propietário página 58

2. Grasp the kick cover on either side (see arrows in the following figure) and
press inward slightly so that the notches on the back of the kick cover
unlock from their mounts.
Figure 10: Kick cover removal
Leg Press Assembly Guide: Routing the Cable Assembly
3. Gently lift the kick cover and set it aside.
4. Using a ⁵ ₃₂-inch hex bit, remove the shoulder bolt next to the pulley. Route
the cable around the pulley, then replace and tighten the shoulder bolt.
Figure 11: Cable and shoulder bolt position
5. Replace the kick cover and then the pulley cover using a ⁵ ₃₂-inch hex bit.
8