Attaching A New Canister - smith&nephew RENASYS GO 66801496 Manual De Instrucciones

Attaching a new canister

1. Power off the device.
2. Disconnect the dressing from the canister as described in the
Disconnecting Your Dressing section.
3. Open the orange canister clips on either side of the canister and
gently pull the canister away from the device.
4. Disposal of used canisters should follow facility protocols or local
guidelines relating to the handling of potentially infected or
bio-hazardous materials. Please contact your healthcare provider for
details about disposal.
5. Remove paper tape around the new canister tubing to release tubing
to the full length.
6. Open both orange clips.
7. Align the canister so that the viewing window is facing forward.
8. Push the canister gently over the inlet port of the device.
9. Engage both canister clips. Clips will click when they are properly
engaged.
*smith&nephew
RENASYS™ GO
Negative Pressure Wound
Therapy
*smith&nephew
RENASYS™ GO
Negative Pressure Wound
Therapy
300ml
200ml
100ml
50ml
21
*smith&nephew
RENASYS™ GO
Negative Pressure Wound
Therapy
300ml
200ml
100ml
50ml
EN
*smith&nephew
RENASYS™ GO
Negative Pressure Wound
Therapy
300ml
200ml
100ml
50ml