Before Use; Baby Unit Power Supply - miniland baby Digital Camera Plus Manual Del Usuario

ENGLISH
• Place the baby monitor well away from heat sources like radiators, chimneys, kitchens and
direct sunlight.
• Keep the Camera away from TV appliances, repeaters and radios. The intense radio signals
generated by these elements could cause noise or even sounds or images to be broadcast on
the monitor. Should this occur, move the camera somewhere else.
4. PRODUCT CHARACTERISTICS
4.1. MONITOR CONTROLS AND FUNCTIONS (FIGURE 1)
MONITOR (FIGURE 1.1)
1. ON/pairing LED indicator
2. Microphone
3. Charge indicator
4. LCD Screen
5. ON/OFF button
6. Loudspeaker
7. Neck strap hook
8. Set button▲
9. Zoom/Menu/Back button
DISPLAY
Screen Icons (FIGURE 1.2)
a. Signal level
b. Volume selected on the monitor
c. Night vision
d. Lullabies
e. VOX Mode
f. Selected camera
Menu Icons (FIGURE 1.3)
A. Select/Add/Remove camera menu
B. Camera Settings Menu
C. VOX/Standby
D. Transmission level
4.2. CAMERA CONTROLS AND FUNCTIONS (FIGURE 2)
I. Retractable antenna
II. Photo sensor
III. Power button
IV. Hanging attachment
V. Speaker
VI. Link button
5. USAGE INSTRUCTIONS

5.1. BEFORE USE

5.1.1. BABY UNIT POWER SUPPLY

The camera or baby unit of this baby monitor is designed for use with the AC/DC adapter
supplied.
1. Place the connector socket (VII) at the rear of the baby unit.
2. Connect the adapter cable to the mini-USB socket of the camera. Only use the adapter
supplied.
10. Set button ▼
11. OK/Scan
12. Baby talk button
13. AV output connector
14. Mini USB power/PC connector
15. Folding support
16. Battery compartment cover
17. Retractable antenna
g. Night light
h. Transmission level
i. Battery level
j. Talk to the baby
k. Alert ON
E. Alert
F. Vibration
G. Screen configuration: luminosity
VII. Mini USB power connector
VIII. Microphone
IX. ON/link LED
X. Camera lens
XI. Infrared
XII. Tripod attachment
16