Cequent Performance Products 76116 Instrucciones De Instalación página 5

4. Install Hitch - Gently raise hitch into position, feed the fish wire
through item 5 and the attachment holes of the hitch, being careful not
to push the hardware back into the frame. Loosely install items 5
through 7 to hold the hitch in place.
5. Reinstall Muffler- Reinstall the muffler removed in step 1. Note: If
exhaust tips were removed they may be reinstalled.
©2017 Cequent™ Performance Products, Inc. - Printed in Mexico
Item 5
Attachment holes
Bottom first
top second
4. Note: for additional clearance using pliers, the heat shield brackets
may be bent up and toward the rear of the vehicle.
6. Tighten all 7/16-14 GR5 hardware with a torque wrench to
50 Lb.-Ft. (68 n-m).
Proper torque is needed to keep the hitch secure to the vehicle
when towing.
Sheet 5 of 15 76116NP 1-9-17 Rev. A