Install Washing Machine - EAS ELECTRIC ETW8120W Manual De Usuario

Install Washing Machine

NOTE
Follow these instructions carefully to ensure proper installation of the
washing machine and to prevent accidents when doing laundry.
Tools needed
You may need to have the following tools to help you in the installation
of your washer:
Scissors
Gloves
Standard Screwdriver
Unpacking the washing machine
Unpacking your washing machine and check if is there any damage
during the transportation. Also make sure all the parts (as shown below)
are included in the product package . If there is any damage to the
washing machine during the transportation, or any parts are missing or
damaged,please contact the local retailer.
*If washing machine is not double inlet, the machine does not have the hot inlet hose.
Select the location
Before installing the washer,the location characterized as follows shall
be selected:
1.Rigid,dry,and level surface(if not level,please make it level with
reference to the following figure'Adjustable Leg').
2.Avoid direct sun light.
3.Sufficient ventilation.
4.The ambient temperature shall be between 0-40℃.
5.The ambient humidity shall be below 95%(When the temperature is
25℃).
6.Keep far away from the heat resources such as coal or gas.Make sure
that the washer will not stand on power cord.Do not install the washer
on the carpet floor.
V.3
Pliers
Spanner
25