EAS ELECTRIC ETW8120W Manual De Usuario página 35

Troubleshooting
Troubles
There is some remaining
water in the machine
The washer does not run
Water leakage
Abnormal noise and
great vibration
Washing efficiency is not
satisfied
The machine take no
answer after press
buttons
Actually running time of
procedures is not
corresponded to the
display time
The washer fills while
draining
V.3
This is normal and is the result of water tests
performed at the factory
Check if the power plug is inserted well.
Check if the tap is opened.
Check if the button "Power" is pressed.
Check if the button "Start/Pause" is pressed.
Check if the delay feature is activated.
Check and fasten inlet hose.
Clean up drain hose and ask a specialized
person to repair it when necessary.
Check and fasten inlet hose.
Clean up drain hose and ask a specialized
person to repair it when necessary.
Select a proper procedure.
Add the proper detergent quantity according
to the instructions in detergent package.
Check if the "Child-lock" feature has beenactivate.
Press button "Start/Pause" first then press
other buttons.
Check if clothes in the drum is dispersive enough.
Check if the water is drain out or inflow well.
Check if the max height of the drain hose is lower
than 65cm
Check if the drain hose is immersed.
Solution
35