Sauder 411985 Manual De Instrucciones página 14

Step 10
Place your unit into its fi nal position against a wall.
å
NOTE: To raise a corner of the unit, turn the ADJUSTABLE GLIDE counter-clockwise. To lower a corner,
å
turn the ADJUSTABLE GLIDE clockwise.
Fasten the SAFETY BRACKET (O) for added stability. Use a BLACK 9/16" LARGE HEAD SCREW (X) into
å
the top of the unit and a BLACK 1-7/8" FLAT HEAD SCREW (V) into a stud in your wall.
Push the RUBBER SLEEVES (S) over the METAL PINS (Q). Insert the METAL PINS into the hole locations
å
of your choice in the ENDS (A and B). Set the ADJUSTABLE SHELVES (G) onto the METAL PINS.
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story?
Q
S
(16 used)
Page 14
No load
G
25 lbs.
G
25 lbs.
B
G
A
25 lbs.
G
25 lbs.
50 lbs.
BLACK 1-7/8" FLAT HEAD SCREW
O
BLACK 9/16" LARGE HEAD SCREW
(1 used into the top of your unit)
411985
(1 used into a stud in your wall)
V
X
www.sauder.com/services