Publicidad

Enlaces rápidos

sauder.com
Storage Cabinet
HomePlus Collection | Model 411965
Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
Store behind
closed doors.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-36
Français pg 37-40
Español pg 41-44
Lot # 358635
01/22/14
Purchased: __________________
Be sure to give us a ring before
making any returns. 1-800-523-3987

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Sauder HomePlus 411965

  • Página 1 HomePlus Collection | Model 411965 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Prefer the phone? Call 1-800-523-3987.
  • Página 2: Tabla De Contenido

    DOOR END (1) SMALL SHELF (1) FRONT SKIRT (1) UPRIGHT (1) BACK (1) SIDE SKIRT (2) TOP (1) LARGE DOOR (1) TOP MOLDING (1) BOTTOM (1) SMALL DOOR (1) DOOR SHELF (3) LARGE ADJUSTABLE SHELF (2) Page 2 411965 www.sauder.com/services...
  • Página 3: Part Identifi Cation

    Now you know Part Identifi cation our ABCs. Hardware Identifi cation FRONT FOOT - 2 REAR FOOT - 2 TWIST-LOCK ® FASTENER - 27 METAL BRACKET - 1 www.sauder.com/services 411965 Page 3...
  • Página 4 SILVER 5/8" FLAT HEAD SCREW - 8 SILVER 3/4" MACHINE SCREW - 2 BLACK 9/16" LARGE HEAD SCREW - 19 BLACK 9/16" WAFER HEAD SCREW - 4 BLACK 1/2" FLAT HEAD SCREW - 8 NAIL - 72 Page 4 411965 www.sauder.com/services...
  • Página 5 Assemble your unit on a carpeted fl oor or on the empty carton to avoid scratching your unit or the fl oor. å To begin assembly, push a SAUDER TWIST-LOCK® FASTENER (V) into the large holes in the ENDS (A and B), DOOR END å...
  • Página 6 Fasten the LARGE SHELF (I) to the LARGE END (B). å Tighten two TWIST-LOCK® FASTENERS. ® How to use the SAUDER TWIST-LOCK FASTENER 1. Insert the dowel end of the FASTENER into the hole of the adjoining part. NOTE: The dowel end of the FASTENER must remain fully inserted in the hole of the adjoining part while locking the FASTENER.
  • Página 7: Mm Black 1-7/8" Flat Head Screw

    BLACK 1-7/8" FLAT HEAD SCREW (2 used in this step) These four holes must be here. 34-3/4" 34-3/4" The measurement must be as shown. If it is not, then fl ip the UPRIGHT (D) end for end. www.sauder.com/services 411965 Page 7...
  • Página 8 Fasten the SMALL SHELF (J) to the UPRIGHT (D). Tighten å two TWIST-LOCK® FASTENERS. Angled edge Finished edge S u r f a c I S T i t h - L O F A S T E N ® E R S Page 8 411965 www.sauder.com/services...
  • Página 9 SHELF (J). Tighten four TWIST-LOCK® FASTENERS. Edge with i t h o ® TWIST-LOCK® f a c S u r - L O FASTENERS I S T E R S T E N F A S www.sauder.com/services 411965 Page 9...
  • Página 10: Large End

    å UPRIGHT (D). Use six BLACK 1-7/8" FLAT HEAD SCREWS (MM). Rounded edge fi n i s h r f a Drill through these pre-drilled holes. BLACK 1-7/8" FLAT HEAD SCREW (6 used in this step) Page 10 411965 www.sauder.com/services...
  • Página 11: Qq Black 9/16" Wafer Head Screw

    BLACK 9/16" WAFER HEAD SCREWS (QQ) through the FEET and into the BOTTOM as shown in the lower diagram. (4 used) This hole must be here. BLACK 9/16" WAFER HEAD SCREW (4 used for the FEET) www.sauder.com/services 411965 Page 11...
  • Página 12: Nail

    NAIL (72 used for the BACK) SILVER 5/8" FLAT HEAD SCREW (8 used for the FOOT BASE) Turn completely in. These holes must be here. BLACK 9/16" LARGE HEAD SCREW (2 used for the ANGLE BRACKET) Page 12 411965 www.sauder.com/services...
  • Página 13 NOTE: Be sure the PINS insert into the edges of the å DOOR SHELVES and DOOR UPRIGHT before you tighten the TWIST-LOCK® FASTENERS. Edge with TWIST-LOCK® FASTENERS Now might be a good time to refresh your drink. Plastic edge Plastic edge www.sauder.com/services 411965 Page 13...
  • Página 14: Important

    BLACK 1/2" FLAT HEAD SCREW (2 used for the STRIKE PLATES) SILVER 3/4" MACHINE SCREW (2 used for the PULL) IMPORTANT: The PULL (X) must be fastened to the DOOR before the END and UPRIGHT are fastened. Page 14 411965 www.sauder.com/services...
  • Página 15 Push the DOOR STOPS (Z) into the holes in the top and å bottom corners of the UPRIGHT (D). Place packing material, books, or magazines underneath the SMALL DOOR for support. BLACK 9/16" LARGE HEAD SCREW (8 used for the HINGES) www.sauder.com/services 411965 Page 15...
  • Página 16 Step 12 Fasten three SPRING HINGES (EE) to the LARGE DOOR (L). LARGE DOOR ON LEFT å Use six BLACK 1/2" FLAT HEAD SCREWS (SS). BLACK 1/2" FLAT HEAD SCREW (2 used for the HINGES) Page 16 411965 www.sauder.com/services...
  • Página 17: Black 7/8" Machine Screw

    å SCREWS (NN). Stop See the next step for DOOR adjustments. å Mounting screw Hinge BLACK 7/8" MACHINE SCREW (2 used for the PULL) Floor Turn the ADJUSTABLE FEET downward until it touches the fl oor. www.sauder.com/services 411965 Page 17...
  • Página 18 To adjust the DOORS in or out (depth), loosen the mounting å screw one turn and move the DOORS in or out, as needed. Tighten the mounting screw after making adjustments. Mounting screw (depth) Adjusting screw (horizontal) (vertical adjustment) Page 18 411965 www.sauder.com/services...
  • Página 19 LARGE END (B) and UPRIGHT (D). Set the ADJUSTABLE SHELVES (N and P) onto the METAL PINS. If you're doing this to help a friend, don't leave without a bite. (12 used) (12 used) (16 used) www.sauder.com/services 411965 Page 19...
  • Página 20 20 lbs. (1 used into the top of your unit) 5 lbs. 30 lbs. 25 lbs. 5 lbs. (6 used) 35 lbs. (8 used) 20 lbs. 5 lbs. 30 lbs. 5 lbs. 5 lbs. 60 lbs. Page 20 411965 www.sauder.com/services...
  • Página 21: Door End

    LARGE DOOR ON RIGHT å carton to avoid scratching your unit or the fl oor. To begin assembly, push a SAUDER TWIST-LOCK® å FASTENER (V) into the large holes in the ENDS (A and B), DOOR END (C), T OP (E), DOOR SHELVES (G), LARGE SHELF (I), DOOR UPRIGHT (H), and SMALL SHELF (J).
  • Página 22 TWIST-LOCK® FASTENERS. Fasten the LARGE SHELF (I) to the LARGE END (B). å Tighten two TWIST-LOCK® FASTENERS. How to use the SAUDER TWIST-LOCK ® FASTENER 1. Insert the dowel end of the FASTENER into the hole of the adjoining part.
  • Página 23: Top

    BLACK 1-7/8" FLAT HEAD SCREW (2 used in this step) These four holes must be here. 34-3/4" 34-3/4" The measurement must be as shown. If it is not, then fl ip the UPRIGHT (D) end for end. www.sauder.com/services 411965 Page 23...
  • Página 24 Fasten the SMALL SHELF (J) to the UPRIGHT (D). Tighten å two TWIST-LOCK® FASTENERS. Angled edge Finished edge i t h f a c ® S u r - L O I S T E R S T E N F A S Page 24 411965 www.sauder.com/services...
  • Página 25 SHELF (J). Tighten four TWIST-LOCK® FASTENERS. Edge with TWIST-LOCK® FASTENERS S u r f a c i t h o I S T - L O F A S T E N ® E R S www.sauder.com/services 411965 Page 25...
  • Página 26 å UPRIGHT (D). Use six BLACK 1-7/8" FLAT HEAD SCREWS (MM). Rounded edge i s h fi n r f a Drill through these pre-drilled holes. BLACK 1-7/8" FLAT HEAD SCREW (6 used in this step) Page 26 411965 www.sauder.com/services...
  • Página 27 BLACK 9/16" WAFER HEAD SCREWS (QQ) through the FEET and into the BOTTOM as shown in the lower diagram. (4 used) (4 used) This hole must be here. BLACK 9/16" WAFER HEAD SCREW (4 used for the FEET) www.sauder.com/services 411965 Page 27...
  • Página 28: Silver 5/8" Flat Head Screw

    NAIL SILVER 5/8" FLAT HEAD SCREW (72 used for the BACK) (8 used for the FOOT BASE) Turn completely in. These holes must be here. BLACK 9/16" LARGE HEAD SCREW (2 used for the ANGLE BRACKET) Page 28 411965 www.sauder.com/services...
  • Página 29 NOTE: Be sure the PINS insert into the edges of the å DOOR SHELVES and DOOR UPRIGHT before you tighten the TWIST-LOCK® FASTENERS. Edge with TWIST-LOCK® FASTENERS Plastic edge Plastic edge Now might be a good time to refresh your drink. www.sauder.com/services 411965 Page 29...
  • Página 30: Small Door

    BLACK 1/2" FLAT HEAD SCREW (2 used for the STRIKE PLATES) SILVER 3/4" MACHINE SCREW (2 used for the PULL) IMPORTANT: The PULL (X) must be fastened to the DOOR before the END and UPRIGHT are fastened. Page 30 411965 www.sauder.com/services...
  • Página 31 Push the DOOR STOPS (Z) into the holes in the top and å bottom corners of the UPRIGHT (D). Place packing material, books, or magazines underneath the SMALL DOOR for support. BLACK 9/16" LARGE HEAD SCREW (8 used for the HINGES) www.sauder.com/services 411965 Page 31...
  • Página 32 Step 28 Fasten three HINGES (EE) to the LARGE DOOR (L). Use LARGE DOOR ON RIGHT å six BLACK 1/2" FLAT HEAD SCREWS (SS). BLACK 1/2" FLAT HEAD SCREW (2 used for the HINGES) Page 32 411965 www.sauder.com/services...
  • Página 33: Side Skirt

    å SCREWS (NN). See the next step for DOOR adjustments. å Stop Mounting screw Hinge BLACK 7/8" MACHINE SCREW (2 used for the PULL) Floor Turn the ADJUSTABLE FEET downward until it touches the fl oor. www.sauder.com/services 411965 Page 33...
  • Página 34 To adjust the DOORS in or out (depth), loosen the mounting å screw one turn and move the DOORS in or out, as needed. Tighten the mounting screw after making adjustments. Mounting screw (depth) Adjusting screw (horizontal) (vertical adjustment) Page 34 411965 www.sauder.com/services...
  • Página 35 LARGE END (B) and UPRIGHT (D). Set the ADJUSTABLE SHELVES (N and P) onto the METAL PINS. If you're doing this to help a friend, don't leave without a bite. (12 used) (12 used) (16 used) www.sauder.com/services 411965 Page 35...
  • Página 36 BLACK 9/16" LARGE HEAD SCREW 5 lbs. (1 used into the top of your unit) 30 lbs. (6 used) 25 lbs. 5 lbs. 35 lbs. (8 used) 20 lbs. 5 lbs. 5 lbs. 30 lbs. 5 lbs. 60 lbs. Page 36 411965 www.sauder.com/services...
  • Página 37: Meuble De Rangement

    PETITE EXTRÉMITÉ ............1 CONSOLE DE SÉCURITÉ ........1 pour future référence. GRANDE EXTRÉMITÉ ..........1 ARRÊT DE PORTE ............2 Pour contacter Sauder en ce qui concerne cet EXTRÉMITÉ DE PORTE ...........1 GOUPILLE EN MÉTAL ......... 34 élément, faire référence MONTANT................1 MANCHON EN CAOUTCHOUC ....
  • Página 38 ÉTAPE 8 Pour commencer l'assemblage, enfoncer une FIXATION TWIST-LOCK® SAUDER (V) dans les gros trous des EXTRÉMITÉS (A et B), l'EXTRÉMITÉ DE Attention:Ne pas relever l'élément dans sa position verticale avant d'avoir fi xé PORTE (C), le DESSUS (E), les TABLETTES DE PORTE (G), la GRANDE l’ARRIÈRE.
  • Página 39 Assembler l'élément sur un sol à moquette ou sur le carton vide pour éviter d'endommager l'élément ou le sol. Pour commencer l'assemblage, enfoncer une FIXATION TWIST-LOCK® SAUDER (V) dans les gros trous des EXTRÉMITÉS (A et B), l'EXTRÉMITÉ DE PORTE (C), le DESSUS (E), les TABLETTES DE PORTE (G), la GRANDE TABLETTE (I), le MONTANT DE PORTE (H) et la PETITE TABLETTE (J).
  • Página 40 ÉTAPE 28 Ceci complète l'assemblage. Pour nettoyer, utiliser l'encaustique pour meubles préférée ou un chiff on humide. Essuyer. Fixer trois CHARNIÈRES (EE) à la GRANDE PORTE (L). Utiliser six VIS NOIRES TÊTE PLATE 13 mm (SS). Page 40 411965 www.sauder.com/services...
  • Página 41: Armario De Almacenamiento

    TOPE DE PUERTA ..............2 et conserver le livret pour future référence. EXTREMO GRANDE ................1 ESPIGA DE METAL ............34 Pour contacter Sauder EXTREMO DE PUERTA ..............1 MANGUITO DE GOMA ............16 en ce qui concerne cet PARAL ......................1 DESLIZAMIENTO AJUSTABLE ........
  • Página 42 Para comenzar el ensamblaje, empuje un SUJETADOR TWIST-LOCK® SAUDER (V) en los NOTA: Para levantar una esquina de la unidad, gire el DESLIZAMIENTO agujeros grandes de los EXTREMOS (A y B), del EXTREMO DE PUERTA (C), del PANEL AJUSTABLE hacia la izquierda.
  • Página 43 TORNILLOS NEGROS DE CABEZA PERDIDA de 13 mm (SS). rayar la unidad o el piso. Para comenzar el ensamblaje, empuje un SUJETADOR TWIST-LOCK® SAUDER (V) en los agujeros grandes de los EXTREMOS (A y B), del EXTREMO DE PUERTA (C), del PANEL...
  • Página 44 Esto completa el ensamblaje. Limpie con su pulimento para muebles preferido o NEGROS DE CABEZA GRANDE de 14 mm (RR). un paño húmedo. Seque con un paño. Empuje los TOPES DE LA PUERTA (Z) en los agujeros en las esquinas superior e inferior del PARAL (D). Page 44 411965 www.sauder.com/services...
  • Página 45 • Ne pas pousser le mobilier, surtout sur la être très lourd. moquette. Se faire aider par une autre personne pour soulever l’élément et le mettre en place • Cette unité doit être placée contre un mur.. www.sauder.com/services 411965 Page 45...
  • Página 46 • No empuje la unidad, especialmente sobre ser muy pesado. un piso alfombrado. Pide la ayuda de otra persona para levantar la unidad y colocarla en lugar. • Esta unidad debe ser colocada contra una pared. Page 46 411965 www.sauder.com/services...
  • Página 47: Garantie Limitée De 5 Ans

    à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
  • Página 48 Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built. If you Nice.

Tabla de contenido