Introduction To The Prodigy Autocode Meter; Intended Use; Test Principle - Prodigy AutoCode Manual Del Propietário

Prodigy
Introduction to the Prodigy AutoCode

Intended Use

The system is intended for use outside the body (in vitro
diagnostic use only). It should be used only for testing blood
glucose (blood sugar) and only with fresh capillary whole
blood samples. The system is intended for use in the home
and in clinical settings. It should not be used for the
diagnosis of diabetes or for the testing of newborns.

Test Principle

Blood glucose is measured by an electric current that is
produced when a blood sample mixes with the reagent
(special chemicals) of the test strip. The electrical current
changes with the amount of glucose in the blood sample.
The Prodigy AutoCode
electrical current, calculates your blood glucose level and
then displays your result in either "mg/dL" or "mmol/L."
The Prodigy AutoCode
Solutions have been designed, tested and proven to work
together as a system to produce accurate blood glucose
test results.
Important: Use only Prodigy
Strips with your Prodigy AutoCode
strips and control solutions with this meter can produce
inaccurate results.
Prodigy Diabetes Care, LLC
Talking Meter
Meter measures the strength of the
®
Meter, Test Strips and Control
®
Control Solutions and Test
®
®
8
Owner's Manual
Meter
®
Meter. Using other test
www.prodigymeter.com