Getting A Blood Sample - Prodigy AutoCode Manual Del Propietário

Ocultar thumbs Ver también para AutoCode:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Prodigy
Alternate Site Testing (AST)
When you want to obtain blood from sites other than the
fingertip, use the clear cap. Screw the clear cap onto the
Lancing Device until it is snug but not too tight, and then
go to Step 6.
STEP 6: Cock the Lancing Device.
Slide the ejection/cocking control back
until it clicks. If it does not click, the
lancing device may have been cocked
when the lancet was inserted. See
Figure 26.
*The Lancing Device is prepared and
ready to lance your finger for a blood sample.

Getting a Blood Sample

STEP 1: Wash Your Hands and the Puncture Site
Use warm, soapy water.
Rinse and dry thoroughly.
STEP 2: Lance the Selected Puncture Site
• Fingertip
Hold the lancing device firmly against the
side of your finger. Press the Release
button. You will hear a click, indicating that
the puncture is complete. See Figure 27.
Prodigy Diabetes Care, LLC
Talking Meter
26
Owner's Manual
Figure 26
Figure 27
www.prodigymeter.com

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido