Silverline 263511 Manual Del Usuario página 6

263511
Always Disconnect
• Before changing fittings or accessories, always ensure that your tool is
disconnected from the power source.
Switch off before connecting
• Ensure that the power tool is switched off before connecting to the power
source. If the power tool stops unexpectedly, turn the power switch to off.
Do not abuse the power cord
• Be sure your cable or extension cable is in good condition. Always have
a damaged cable or extension cable replaced at an authorised service
centre before using it. Never yank or pull the cable to disconnect it from
the power socket. Never carry your tool by its cable. Keep the cable away
from damp, heat, oil, solvents, and sharp edges.
Don't leave the tool running unattended
• Always wait until your tool has completely stopped functioning, and has
been unplugged, before leaving it.
150mm Bench Grinder
www.silverlinetools.com
5