EAS ELECTRIC ECH R32 Serie Manual De Instalación Y Usuario página 64

DAILY TIMER 1
ACT T.ON T.OFF
ON 10:00A 12:00A
SILENT
MODE
OK
DAILY TIMER 2
ACT T.ON T.OFF
ON 10:00A 10:00A
SILENT
MODE
OK
After MODBUS control and the remote
control of the external machine are used,
the daily and weekly time settings of the
wired controller are invalid, and users
cannot enter the timing menu for setting,
the daily timer and weekly schedule
promote "DISABLE"
menu/time interface.
MODE TEMP
HEAT
40℃
NIGHT SILENT
MODE TEMP
HEAT 40℃
NIGHT SILENT
on the user
TIMER
DAILY TIMER
WEEKLY SCHEDULE
DATE AND TIME
OK
Only one setting is enabled between
"DAILY TIMER"
SCHEDULE". If any of the pattern in
"WEEKLY SCHEDULE" is set to ON,
"DAILY TIMER" is disabled. "DAILY
TIMER" can be setted across days, but
"WEEKLY SCHEDULE" can't be.
Users can set up to two timings, and set
the ON or OFF time (set the interval of time
to 10 minutes) 、operation mode(COOL
mode and HEAT mode ) and temperature
setting for each segment of timing.
When the cursor stays at "DAILY TIMER
1",press "◄" and "►" to select "TIMER 1"
or "TIMER 2". Press "▲" and "▼" to select
"DAILY TIMER 1", ACT, "SILENT MODE".
Press the"ON/OFF" button to enable or
disable daily timer function.
8
(DISABLE)
(DISABLE)
and "WEEKLY
V.1