EAS ELECTRIC ECH R32 Serie Manual De Instalación Y Usuario página 69

TEMP COMPENSATION
COOL MODE
HEAT MODE
OK
Press the "▲" and "▼" buttons to select the
COOL MODE and HEAT MODE, and press
the "OK" button to enter the interface. The
interface display is as follows:
TEMP COMPENSATION-COOL MODE
T4
SETPOINT T4
COOL_1 COOL_2
COOL_1
25 35
ok
OFFSET
ENABLE
_C
10 NO
TEMP COMPENSATION-HEAT MODE
T4
SETPOINT T4
COOL_1 HEAT_2
HEAT_1
2 15
ok
Operation instructions:
Press the "◄" and "►" buttons to select the
cool mode or the heat mode, press the "▲"
and "▼" buttons to adjust the parameter
value.
press the "OK" button to save the setting and
return to the previous interface,or press the
"BACK" button to cancel the setting and return
to the previous interface.
The value of T4 COOL_1 and T4 COOL_2 of
temp compensation-cool mode need to satisfy
the condition of T4 COOL_2-T4 COOL_1 >=0.
3.5 Setting PROJECT MENU
◆
Entering the password:
Select "PROJECT MENU", and press the "OK"
button to enter the menu. The screen prompts
the user to enter the password, as shown
below:
13
OFFSET
ENABLE
_H
10 NO
V.1