EAS ELECTRIC ECH R32 Serie Manual De Instalación Y Usuario página 79

MANUAL DEFROST
PERFORM MANUAL DEFROST ?
NO
OK
NOTE:
Press "▼" and "▲" to select "YES" or "NO",
and press "OK" to save the settings and
return the previous interface, while press
"BACK" to cancel the settings and return
the previous interface. Only settings sent
complete can set the next module when
returning to the settings interface.
"PARAMETER SETTING" is shown on
the interface when the send is not
completed while it will disappear after
sent.
◆
Pump manual switch
The pump manual switch function is only
valid for the main unit.
If The main interface has shown boot, it
will show "Cannot Control The Pump
Before Shutting Down" after selecting
"PUMP MANUAL SWITCH" menu.
SERVICE MENU
STATE QUERY
HISTORY ERRORS QUERY
MANUAL DEFROST
PUMP MANUAL SWITCH
ok
PUMP MANUAL SWITCH
Cannot Control The Pump
Before Shutting Down.
ok
If the main interface shows shutdown, it will
enter the following interface to select pums.
PUMP MANUAL SWITCH
SELECT THE ADDRESS
OK
23
00
V.1