Belt Clipo; Eadset And; Connecting An Optional; The Handset - GE 27959 Guia Del Usuario

H

EADSET AND

C
ONNECTING AN
For hands free conversation:
1. Connect the optional headset to the
HEADSET jack as shown. The
handset receiver and microphone are
disabled when the headset is
connected to the handset.
2. Adjust the headset to rest comfortably
on top of your head and over your ear.
3. Move the microphone to
approximately 2 to 3 inches from
your mouth.
4. Press the TALK/callback button to answer or place
a call.
C

ONNECTING THE

1. Attach the belt clip by inserting the clip into the slots on
either side of the handset.
2. Snap the belt clip into place.
D M
ISPLAY ESSAGES
The following indicators show the status of a message or of the unit.
ERROR
ENTER NAME
DELETE ALL?
DELETE CALL ID?
40
B C O
ELT LIP
O H
PTIONAL EADSET TO THE
B C
ELT LIP
Caller ID information was interrupted during
transmission or the phone line is excessively noisy.
You should enter a name in one of the 10
memory locations.
Prompt asking if you want to erase all
Caller ID records.
Prompt asking if you want to erase the current
Caller ID record that is shown on the display.
PERATION
H
ANDSET
Headset jack
Headset plug
Slots