Eleting The; Ecord; Deleting All Caller - GE 27959 Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

NOTE: If the incoming number is a Direct Dial Number, it is supplied by your
local phone company, and you may not adjust its format. When you press the
format/answerer button on handset or the format button on the base, PRESS
TALK KEY displays. Press the TALK/callback button on handset or the
SPEAKER/callback button on base to dial the number.
3. If the number does not dial as shown, press the format/answerer button
on handset or the format button on the base. Repeat if necessary, until
the correct number of digits show in the display.
4. Press the TALK/callback button on the handset or SPEAKER/callback on
the base. The number dials automatically.
NOTE: If the CID record is corrupted, such as a number in a name field or an
alphabetical character in a number field, an error tone sounds from the
handset or base and the number cannot be dialed.
D

ELETING THE

To delete only the record in the display:
1. Use the cid/messages ( < or > ) button (base) or CID/VOL ( < or > ) button
(cordless handset) to display the desired Caller ID record.
2. Press delete/erase button (base) or chan/delete button (handset). The
display shows DELETE CALL ID? for several seconds.
3. Press delete/erase button (base) or chan/delete button (handset) again to
erase the record. The display shows DELETED , confirming the deletion.
D
A
ELETING
LL
To delete all the Caller ID records in memory:
1. Use the cid/messages ( < or > ) button (base) or CID/VOL ( < or > ) button
(cordless handset) to display any Caller ID record.
2. Press and hold delete/erase button (base) or chan/delete button
(handset). The display asks DELETE ALL? for several seconds.
3. Press delete/erase button (base) or chan/delete button (handset) again
to erase all records. The display shows NO CALLS .
32
C
C
URRENT
ALLER
C
ID R
ALLER
ECORDS
ID R

ECORD

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido