jbc DDVE-1B Manual Del Usuario página 13

MVE Initial Setup
After connecting the pneumatic desoldering module (MVE-A), enter the
Peripherals Menu and select the port which you want to join with the module.
Peripherals
1. Select the module from the list of peripheral
connections. Remember your first connection
is denoted as "a", the second being "b", etc.
(e.g. MVE_a, MVE_b,...)
2. Press Menu or Back to save changes.
Once set up, you can change the module
settings by entering the Peripherals Menu.
MVE Changing
the pump filters
- Use a damp cloth to keep the casing clean.
- Periodically check all cable and tube
connections.
- Keep filters clean to ensure proper solder
suction and replace them when
necessary.
Suction filter
Ref. 0821830
Cotton filters
Ref. 0781046
O Ring
Ref. 0007717
Filter cover
Ref. 0004710
Important: Do not use sharp pointed objects to open the suction filter.
Peripherals
Pedal
Module
Removing the
pneumatic tubing
- Push the release ring to remove the
pneumatic tubing.
Spare filters
Ref. 0005966
w w w.jbctools.com
17:14
Port 2-DR
None
Module
None
MVE_a
None
1
2
Release ring
Escape filter
Ref. 0008446
13