Tip Cleaner; Splashguard - jbc DDVE-1B Manual Del Usuario

ESD Tip Cleaner
Improve thermal transfer by cleaning the tip after each solder joint.
Brass wool
Ref. CL6210
Very effective cleaning
method. It leaves a small layer
of solder on the tip to prevent
oxidation between cleaning
and rewetting.

Splashguard

It prevents splashing of
solder particles. Also used
for sponge or brushes.
ESD Tip Wiper
Ref. CL0240
A temperature resistant receptacle
lets the operator remove excess
solder by gentle tapping or wiping.
Optional
Inox wool
Ref. CL6205
Brushes
Ref. CL6220
w w w.jbctools.com
Tapping:
Tap to remove excess
solder.
Tip-tinner
Ref. TT-A
Sponge
Ref. S0354
The least harmful
cleaning method.
Keep the sponge damp
with distilled water when
working to avoid tip wear.
Non-slip base
No need to hold the
base while cleaning tips.
Wiping:
Use the slots to remove
remaining particles.
Sand
Ref. CL6211
7