Working With Robots - jbc DDVE-1B Manual Del Usuario

Working with Robots

Manage and monitor the station using a Robotic system.
1. Connect the tool to the station port by means of the CHB-A Converter.
2. Connect your Robot system to the Robot connector (RJ12) of the station.
DB9-RJ12 Adapater available only if necessary (Ref: 0013772).
3. Enable the Robot option in the station settings and the notification will be displayed:
4. Set your Robot's commands according to the Robot Communication Protocol, available on the
website www.jbctools.com/jbcsoftware-menu-115.html.
Robot
Update the station software
1. Download the JBC Update File from
www.jbctools.com/software.html and save
it on a USB flash drive. Preferably one with no
other files.
Update File
18
JBC
CHB-A
Converter
Ref. CHB-A
RS-232
connection
2. Insert the USB flash drive to the station.
The icon is diplayed while updating.
Control
Unit