User Instructions
1. Plug the power cord into an electrical outlet.
2. For fan use only, turn the control knob to the right to LOW, MED, or HI.
3. For fan and oscillation mode, press the ON/OFF button.
4. To turn the fan off, turn the control knob to OFF.
4
Cleaning and Maintenance
CAUTION:
Always be sure that the tower fan is switched to OFF and unplugged before
cleaning or attempting to store the fan.
1. Before cleaning, turn the tower fan off and unplug from electrical outlet.
2. Wipe off excess dust with a lint free cloth.
3. A vacuum cleaner brush attachment can be used to clean the fan guards. This
will help remove lint and dirt from inside the fan. DO NOT ATTEMPT TO TAKE
THE FAN APART.
NOTE: A can of compressed air may also be used to help push any excess dirt
out of the fan and into the vacuum cleaner.
4. Should the fan housing become soiled, it can be cleaned with a damp cloth
using warm (not hot) soapy water and a mild detergent solution. Wipe dry.
5. Do not submerse your fan in water or any other liquids. Do not allow any
liquid to get into the fan or motor
Please Note:
Take care not to stain the plastic parts with oil. Avoid using the fan in places
where oil is liable to spill on fan. Damage or deterioration can be caused by oil on
the housing.
User Instructions
2
3
9