User Instructions; Wall Mounting; Cleaning And Maintenance - Easy Home BN-8U8 Manual De Usuario

User instructions

User instructions
Place the fan on a level and dry surface. Plug the power cord into a polarized 120V
AC wall outlet.
1. Select the desired speed O (Off), L (Low), M (Medium), H (High) (see Fig. B).
2. Adjust the angle of the fan to the desired air output direction.
3. To move the fan, turn fan OFF and use concealed carrying handle on back of fan.
Wall Mounting (optional)
1. Locate and mark a suitable position on the wall to mount the fan (preferably at a
wall stud).
2. Hold the fan against the wall at the location you would like it to be installed.
3. Use a pencil to mark the location of the mount opening screw holes on the base of
the fan. Place fan aside and drill pilot holes through the marks you have made on
the wall.
4. Insert anchors (not included) into the holes.
5. Place mount screws (not included) through the holes in the wall mount openings,
and then place the fan into position on the wall.
6. Tighten the screws until the wall mount is flush against the wall.
7. Once securely attached to the wall, the fan can be plugged into an electrical
outlet.

Cleaning and Maintenance

CAUTION!
Always be sure that the appliance is switched OFF before cleaning
the appliance or attempting to store the item.
DO NOT IMMERSE THE AIR CIRCULATOR FAN IN WATER OR ANY
OTHER LIQUID. DO NOT USE ANY ABRASIVE MATERIAL TO CLEAN
THE SURFACE!
1. Before cleaning, turn the fan off and unplug from electrical outlet.
2. Wipe off excess dust with a lint free cloth.
3. A vacuum cleaner brush attachment can be used to clean the
fan guards. This will help remove lint and dirt from inside the
fan. DO NOT ATTEMPT TO TAKE THE FAN APART.
12