User Instructions - Easy Home CF-6002 Manual Del Usuario

User instructions

Before first use
Check to make sure all parts are included and that there is no damage to the unit
or its parts. The fan should be fully charged before using for the first time
charging time will take approximately 10 hours.
Once fully charged, below is the approximate operating time at each speed until
the fan reaches "LOW Battery":
LOW Speed
Min. 17 hours
Charging while fan is OFF: Plug the micro USB cord into the micro USB port on the
back of the fan and plug the USB end of the cord into a USB port on a computer or
DC5V/1A adaptor and plug into a wall outlet. The red LED light will be on to
indicate the fan is charging. The fan is at full charge when the white LED light on
and the red LED light is off.
Charging while fan is ON: Plug the micro USB cord into the micro USB port on the
back of the fan and plug the USB end of the cord into a USB port on a computer or
DC5V/1A adaptor and plug into a wall outlet. The white and red indicator lights
will be ON. The fan will only operate on LOW speed while the unit is charging. The
fan is at full charge when only the white LED light indicator is on.
LED light indicator
On
On while charging
(only operates on LOW)
Low battery
Charging
Full charge - plugged in
Full charge - not plugged in
Off
8
MED Speed
Min. 15 hours
White light
White and red lights
Flashing white light
Red light
White light
No lights
No lights
User instructions
. Full
High Speed
Min. 9 hours