ECOVACS DEEBOT D79 Manual De Instrucciones página 24

5. Troubleshooting
NO. Malfunction
Remote Control
failure (effective
5 control range of
Remote Control
is 5m (16')).
22
EN
Possible Causes
The batteries in the Remote
Control need to be replaced.
The Bottom Power Switch is
turned OFF, or DEEBOT 7's
battery is low.
The infrared signal cannot
be transmitted because the
Infrared Emitter on the Remote
Control or DEEBOT 7's Infrared
Receiver on DEEBOT 7 is dirty.
There is other equipment
interfering with the infrared
signal to DEEBOT 7.
Solutions
Replace with new batteries making sure
they are installed correctly.
Make sure DEEBOT 7's Bottom Power
Switch is ON and fully charged.
Use a dry cloth or the Multi-Function
Cleaning Tool to wipe the Infrared Emitter
on Remote Control and the Infrared
Receiver on DEEBOT 7.
Avoid using the Remote Control near other
equipment using infrared signals.