Cleaning Mode Selection - ECOVACS DEEBOT D79 Manual De Instrucciones

6 Pause
Pause DEEBOT 7 by pressing any button on
DEEBOT 7 or the Pause Button on the Remote
Control.
*
DEEBOT 7 can be directed to move forward,
backward, left and right using the Direction
Control Buttons on the Remote Control when
it is Paused. DEEBOT 7 does not clean when
Paused.
Automatic Emptying
7
When DEEBOT 7 finishes cleaning, or its
battery gets low, it returns to the Charging
Dock to recharge itself. Once DEEBOT 7 docks
successfully, it automatically empties its own
Dust Bin into the Handheld Vacuum Cleaner.
*
Automatic Emptying will last about 20 seconds.
Do not remove the Handheld Vacuum Cleaner
from the Charging Dock during this process to
avoid dust leakage or damage.

3.3 Cleaning Mode Selection

DEEBOT 7 has several Cleaning Modes for you to choose from to effectively clean different
floors. Cleaning Modes are selected using the Mode Selection Button on the robot's Control
Panel or using the Remote Control.
*
To switch Cleaning Modes using the Mode Selection Button on DEEBOT 7's Control Panel,
Pause DEEBOT 7 first. Press the Mode Selection Button on DEEBOT 7 until the desired mode
icon appears on the Control Panel Screen, then press START/PAUSE Button to start cleaning.
*
To switch Cleaning Modes using the Remote Control press the desired Cleaning Mode button.
1 AUTO Cleaning Mode
This is the most commonly used mode. In AUTO Cleaning Mode, DEEBOT 7 cleans in a straight line
and changes direction when it meets an obstacle.
3. Operating and Programming
11
EN