Quick Start - ECOVACS DEEBOT D79 Manual De Instrucciones

3.2 Quick Start

Charging Dock Placement
1
Assemble Charging Dock: Insert Handheld
Vacuum Cleaner into the Charging Dock and
ensure it is securely locked in place.
Placement: Place the Charging Dock on a
level floor surface against the wall with the
base perpendicular to the ground. Keep
the immediate area 1.5m (5') in front of the
charger and 0.5m (1.6') on both sides of
the charger clear of objects and reflective
surfaces.
Plug the Charging Dock in.
2 Install Side Brushes
Attach Side Brushes to the bottom of
DEEBOT 7 by pressing a brush into each slot
with the matching color until it clicks.
Power ON
3
Turn the robot's Bottom Power Switch to
the ON position. "I" indicates ON and "O"
indicates OFF.
*
When DEEBOT 7 is not working, it is suggested
to keep it powered ON and charging, instead of
powered OFF.
3. Operating and Programming
ON
9
EN