Preparing The Printer - Canon PIXMA iP2600 Guía De Iniciación Rápida

Preparing the Printer

Be sure to read your setup sheet first for setting up your printer and getting it ready for use.
Unpack the printer
Please confirm the included items against the illustration printed on the lid of the packing box.
Caution
Be sure to remove the tapes and protective material before you turn on the printer.
Important
A USB cable is necessary to connect the printer with your computer.
1
Turn on the printer.
2
Prepare the FINE Cartridges.
Caution
Do not touch internal parts other than the FINE Cartridge Holder.
Do not drop or shake FINE Cartridges as this may cause the ink to leak out and stain your
clothes and hands.
Important
Wait until the FINE Cartridge Holder has moved to the left automatically and stop.
Do not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge. The printer may
not print out properly if you touch it.
Do not reattach the protective tape once it has been removed.
Handle the removed protective tape carefully to avoid getting your hands dirty or staining
surrounding work area.
3
Install the FINE Cartridges.
Be sure to use the printer with both Black and Color FINE Cartridges.
Otherwise, the printer cannot print. When either of ink runs out while printing, you can select
to use either Color or Black ink as a printer driver setting. However you must use the printer
with both Black and Color FINE Cartridges installed regardless of the printer driver setting.
Important
If the Top Cover is left open for more than 10 minutes, the FINE Cartridge Holder moves to the
right side. Close and reopen the Top Cover to return the holder to the left.
Make sure that all the FINE Cartridges are installed in the correct position. The printer cannot
be used unless all the FINE Cartridges are installed.
Once you have installed the FINE Cartridges, the Power lamp will flash green. Wait for about
one to two minutes, until the Power lamp stops flashing and changes to steady, non-flashing
green and the printer has stopped making operating noises, before proceeding.
Note
The Alarm lamp on the printer still flashes orange if a FINE Cartridge is not installed properly.
Open the Top Cover and make sure that position of all the FINE Cartridges is appropriate.
4 Preparing the Printer