Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Do not lift or pull the door or the door handle during
transport.
When moving, the device can not be tilted more than 45
degrees (the angle with respect to the vertical direction).
Please avoid strong vibrations and blows to the device
as they could affect its operation.
The content of the packaging should be as follows (* the
final content may vary depending on the model
purchased):
• Wire shelf (1)
• Plastic shelf (1)
• User's manual and warranty (1)
3. INSTALLATION
APPLIANCE POSITION
• Good
required to allow easy dissipation of heat, freezing
high efficiency and low energy consumption. For
this purpose, you should leave around the fridge
enough open space. It is recommended to keep
100 mm between the back of the refrigerator and
the wall at least 100 mm of space between the
sides and the obstacle or wall 200mm above the
top of the appliance and free space in the front to
allow opening doors.
• Do not pull or bend the power cable while the
device is working. In addition, it is forbidden to
keep the power cable by the compressor at the
back
ventilation
of
the
refrigerator,
around
the
refrigerator
as
the
surface
is
40
Publicidad
Tabla de contenido
