1. Unclip and remove the shifter trim
panel. (Figure A)
2. Unclip and remove the display trim
panel above radio. (Figure B)
3. Unclip and remove the radio/climate
control trim panel. (Figure C)
4. Remove (4) Phillips screws securing the
radio. (Figure D)
(Figure A)
2
DASH DISASSEMBLY
(Figure B)
(Figure C)
(Figure D)
5. Remove (4) Phillips screws securing
the factory gauges to the radio/climate
control panel. (Figure E)
6. Remove (4) Phillips screws securing
the climate control to the radio/climate
control panel. (Figure E)
7. Remove (4) Phillips screws securing the
pocket assembly to the radio/climate
control panel. (Figure F)
Continue to Kit Preparation
(Figure E)
(Figure F)
|
1.800.221.0932
MetraOnline.com