Volume Adjustment; Selecting The Source - Pioneer AVR-W6100 Manual Del Usuario

Volume Adjustment

Adjust the volume of audio output from the wired headphones.
For details concerning volume adjustment with wireless headphones, refer to the instruc-
tions included with the headphones.
• Raise or lower the wired headphone volume.
The volume of the headphone can be adjusted in a range of 0 to 30. (The volume level will
be displayed for about 4 seconds.)

Selecting the Source

You can select a source you want to view or listen to.
• Select the desired source.
Each press changes the source ...
Each press of the SOURCE button selects the desired source in the following order:
[TV] = [VIDEO1] = [VIDEO2] = [VIDEO3] = Exit to [TV]
Notes:
• In the following cases, the source will not change:
* When a product corresponding to each source is not connected to this product.
* When the [VIDEO2] and [VIDEO3] is set to OFF. (Refer to page 22.)
• When the [SUB SOURCE SETTING] is [AUTO], video and audio output from the RCA output
also change.
• When the [SUB SOURCE SETTING] is [AUTO], if you switch the RCA output source with the
SUB SOURCE button, this product's source also changes.
VO L
VIDEO1
Icons indicate the selected sources.
1 2
16