Cleaning And Care; Hints On Disposal; Declaration Of Conformity - Klarstein Mr. Barbot 10026371 Manual Del Usuario

Attention:
To avoid electric shock always unplug you party fridge before cleaning and moving. Ignoring this warning may
result in injury. Do not use harsh chemicals, abrasives, ammonia, chlorine bleach, concentrated detergents,
solvents or metal scouring pads. SOME of these chemicals may dissolve, damage and/or discolor your party
fridge.
1. Remove the contents of the appliance
2. Wipe the inside and outside with surfaces with a damp cloth. The addition of vinegar to the water is good
for the prevention of mold and fungus.
3. Take the lid apart as shown on the drawing and clean it.
4. Clean the detachable bottom and the lid parts with lukewarm water and detergent.
5. Wipe all parts thoroughly after the cleaning.
6. Turn the slits in the sealing ring and in the hinge rubber strip downward when assembling the lid.
Important:
When the Party Fridge is not in use it must be completely dry inside to avoid mold growth (if possible have
the lid open).
10

Cleaning and Care

Hints on Disposal

According to the European waste regulation 2012/19/EU this symbol on the product
or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more de-
tailed information about recycling of this product, please contact your local council or your
household waste disposal service.

Declaration of Conformity

Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
2009/643/EC (ErP)