Cleaning And Care - Klarstein 10033689 Manual De Instrucciones

CLEANING AND CARE

Cleaning beer tap mechanism
Beer cooler need conformity with hygienically demand, it need clean before the first use
or for long time use (Advice to clean per week), clean the whole machine with dry cloth.
Otherwise two cleaning way is recommended as following:
1. Load the warm water into the cleaning kit.
2. And connect the end of piercing pin, press the water into the pin to clean the pin
tube, and push the water out from the beer tube at the other end. And repeat this
cleaning work till the beer tube clean (need 3 bottles warm water at least). Please
clean the beer tap mechanism as figure 23.
Note: Please disassemble the tap before cleaning (as shown in figure 22).
Beer connector must connect with
dispensing unit.
Please
open the
faucet
when
you are
cleaning
the beer
tube.
Figure 22
Note: Never put the tap mechanism parts in the washing machine or dishwasher.
Never use the chemical cleaning detergent to clean the parts, warm or purified water
is recommended.
Dispensing This connector must be connected
unit with the air bulb.
Air bulb
Figure 23
EN
41