Kohler STERLING 3190A Serie Guia De Instalacion página 6

#8-18 x 1-1/2"
Panhead Screw
Wall Jamb
Front Leg
Caulk here.
3. Install the Wall Jambs
Apply a bead of caulk or silicone sealant along the back side of the wall jamb toward the front leg.
With the slots of the wall jamb facing toward the inside of the shower, place the wall jamb down
over the end of the bottom "C" frame. Ensure the holes in the wall jamb align with the holes in the
wall.
Secure the wall jamb to the wall with three #8-18 x 1-1/2" panhead screws.
Repeat this procedure for the second wall jamb.
4. Determine the Direction of Door Swing
Determine whether the door will pivot to the right or left.
Make sure the path of the shower door will not be obstructed as it swings open.
IMPORTANT! The illustrations and instructions in this guide are for right pivot installations. Left pivot
installations will be opposite of what is illustrated and described.
1034048-2-B
Slots Toward
Inside of
Shower
Wall Jamb
Front Leg
Bottom "C" Frame
Shower
Left Pivot
120˚ Swing
About 23-1/4"
(59.1 cm)
Make sure the path of the
door is not obstructed as it
swings open.
6
About 23-1/4" (59.1 cm)
Right Pivot
120˚ Swing
Sterling