W M P; Ttaching The; Important; Connecting The Handset - GE 29485 Guia Del Usuario

A

TTACHING THE

1. Turn the phone over so that the
bottom of the base is facing up and
the thickest end is pointing away
from you.
2. Turn the mounting pedestal so that
the flat side is facing upwards.
3. Thread both telephone line cords
through the groove on the thin end
of the pedestal.
4. With the thin end of the pedestal
pointing upward, insert the tabs on the rounded edge of the pedestal
into the two lower slots on the bottom of the base, then push the
pedestal down until all of the tabs snap into place.
IMPORTANT: To mount the phone on the wall, slip the mounting circles on
the pedestal over the wall plate posts and firmly slide the unit down into place.
C
ONNECTING THE
1. Connect one end of the coiled handset cord to the jack on the side of the
base unit.
2. Connect the other end of the cord to the jack at the bottom of the
handset, then place the handset in the cradle.
10
W M
ALL OUNT
H
ANDSET
P
EDESTAL
Groove