TIP: Temporary Tone can also be used while storing numbers in memory by
pressing TONE * at the necessary point in the storage sequence.
R
EDIAL
1. Pick up the handset, or press SPEAKER. The line is automatically selected.
OR
2. Press the HEADSET button, and then press the desired line button.
3. Wait for a dial tone. Then press REDIAL.
NOTE: The redial function will not operate if the number to be redialed
contains more than 32 digits. If the number is longer than that, you will hear
an error tone.
U
O
T
SING
NE
OUCH
If the last call you dialed was busy, you can redial it immediately by just
pressing the REDIAL button without hanging up the handset.
V
OLUME
You may adjust the ringer, speaker, handset and headset volumes
independently with the VOLUME up and down buttons. Your telephone
comes with predetermined settings which can be adjusted to individual
taste. You will hear an error tone when the maximum or minimum volume
level is reached.
A
DJUSTING THE
Press the VOLUME up or down button while in on-hook mode.
NOTE: To turn the ringer off, on, or change the ringing pattern, see Selecting
A Ringer Tone.
A
DJUSTING THE
Press the VOLUME up or down button while the handset is in
conversation mode. You may choose from four volume settings: LOW,
MID1, MID2, and HIGH.
16
R
EDIAL
R
V
INGER
OLUME
H
V
ANDSET
OLUME