Peakerphone; Headset; Olume; Djusting Thes - GE 29485 Guia Del Usuario

A
DJUSTING THE
Press the VOLUME up or down button while in speakerphone mode
(SPEAKER indicator is on). You may choose from four volume settings:
LOW, MID1, MID2, and HIGH.
A
DJUSTING THE
Press the VOLUME up or down button while in headset mode (HEADSET
indicator is on). You may choose from four volume settings: LOW, MID1,
MID2, and HIGH.
CAUTION: Use only the ATLINKS USA, Inc. 5-2425 headset with this
unit. Using other headsets may damage the unit. For information on
ordering the headset, refer to Connecting An Optional Headset.
NOTE: To return to the preset settings, see " Reset to Default Settings."
C C
ONFERENCE
This feature allows you to have a 3-way conversation using any
combination of 2 lines.
C
ONNECTING AND
1. Press the line button for the line you want to use, then call the first party.
2. Press the HOLD button to place the first party on hold.
3. Call the second party, or receive a call, on the other line then press the
CONFERENCE button. The CONF icon shows in the display.
4. Begin speaking to both parties.
NOTE: If you have more than one line on hold, and you want to conference
with another party on another line, simply press the CONFERENCE button
and select a line on hold to talk to both parties.
NOTE: To put both parties on hold, press the HOLD button.
NOTE: To speak to one party individually, press the HOLD button then press
the line of the party to whom you want to speak (the second part remains on
hold). If the speakerphone indicator is off and you are using the
speakerphone, press the SPEAKER button to continue the conversation on the
speakerphone.
S

PEAKERPHONE

H V
EADSET

OLUME

ALLS
C
ONFERENCING
V
OLUME
17