• Do not pull the electric cord
when disconnecting the appli-
ance. Firmly grasp the plug and
pull it out.
installation instructions
remove packaging material
• Remove all packaging material. Take out the foam bottom board
from the cabinet.
• Open the washer lid and take out all accessories.
• DO NOT place the appliance on the foam bottom board.
installation of drain hose
1. Completely slide the drain
hose onto the washer drain
port.
2. Tighten the connection using
the wire clamp (as shown in
the figure).
• DO NOT place children or
heavy items on the washer.
• Do not wash down-filled items,
raincoats, fishing coats or simi-
lar clothes in the washer.
Foam
Base
29